MOT Status
ExpiredMileage
119,178 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside arch (5.3.6 (a) (i))
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill inside arch (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills o/s and n/s (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear coil spring broken (2.4.C.1a)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement axle (2.4.G.2)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement axle (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear rear brake binding (3.7.B.1)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GV06 EWY is a 2006 Ford Ka in Blue with a 1,297cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying GV06 EWY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GV06 EWY?
You can check the full history of GV06 EWY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GV06 EWY registered?
GV06 EWY is a 2006 Ford Ka, first registered on 15 May 2006.
Is GV06 EWY safe to buy?
The MOT history for GV06 EWY shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GV06 EWY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GV06 EWY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.