MOT Status
ExpiredMileage
99,191 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the lens which changes emitted colour to other than white or yellow (4.1.4 (b))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Windscreen washer not working (3.5 (a))
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Windscreen washer not working (3.5 (a))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner cill (5.3.6 (a) (i))
Offside Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Headlamp has a product on the lens so that the light output is severely reduced both sides (4.1.4 (b))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Exhaust has a major leak of exhaust gases flange (6.1.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases rear clamp (6.1.2 (a))
Headlamp has a product on the lens so that the light output is severely reduced both sides (4.1.4 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Brake pipe excessively corroded pipe to o/s rear (3.6.B.2c)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit 3mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)
cracks in tread of o/s rear tyre
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit 3mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)
cracks in tread of o/s rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GV06 GVJ is a 2006 Peugeot 107 in Blue with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying GV06 GVJ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GV06 GVJ?
You can check the full history of GV06 GVJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GV06 GVJ registered?
GV06 GVJ is a 2006 Peugeot 107, first registered on 25 March 2006.
Is GV06 GVJ safe to buy?
The MOT history for GV06 GVJ shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GV06 GVJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GV06 GVJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.