2007 Audi A6

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Front Seat belt buckle slightly damaged (7.1.2 (d))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

general underbody corrosion

under trays fitted under the vehicle not allowing full inspection of sills and body corrosion

Front Headlamp aim projected beam image is obviously incorrect both headlamps, clouded over (4.1.2 (c))

Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch corroded away, (6.2.2 (d) (i))

Nearside Front Seat belt buckle slightly damaged (7.1.2 (d))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

general underbody corrosion

under trays fitted under the vehicle not allowing full inspection of sills and body corrosion

Front Upper Suspension arm ball joint has slight play both and both sides (5.3.4 (a) (i))

Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both and on both sides (5.3.4 (a) (i))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Front Upper Suspension arm ball joint has slight play both and both sides (5.3.4 (a) (i))

Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both and on both sides (5.3.4 (a) (i))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Headlamp aim too high adjusted internal adjuster to bring within spec (adjuster on h/l broken) (4.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Upper Suspension arm mounting has an unsafe modification incorrect bolt fitted (5.3.3 (c) (i))

Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Items removed from driver's view prior to test ()

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement Both front upper arm rear bushes (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement both arms rear bushes (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

rear brake pads below half worn