MOT Status
ValidMileage
115,535 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Front Fog lamp not working
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Fog lamp not working
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Power steering fluid reservoir empty (2.1.5 (b) (ii))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front All position lamps not working (1.1.A.3b)
Offside Front All position lamps not working (1.1.A.3b)
Under-trays fitted obscuring some underside components
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Both rear tyres damaged on outer walls
Nearside front tyre damaged on outer wall
How Reliable is the Mazda 5?
Based on 413,409 MOT tests across 26,269 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GV10 KFU is a 2010 Mazda 5 in Black with a 1,998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2010 Mazda 5 models, the average MOT pass rate is 70.8% with a typical mileage of 69,586 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 5 fails its MOT is shock absorber has a serious fluid leak, accounting for 13,334 recorded failures. If you're considering buying GV10 KFU, it's worth having these areas checked by a mechanic before committing.
The Mazda 5 typically stays on UK roads for around 21 years. At 16 years old, this Mazda 5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GV10 KFU?
You can check the full history of GV10 KFU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GV10 KFU registered?
GV10 KFU is a 2010 Mazda 5, first registered on 30 July 2010.
Is GV10 KFU safe to buy?
The MOT history for GV10 KFU shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GV10 KFU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GV10 KFU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.