2002 Toyota Corolla

all suspension components corroded... corrosion to underside... prescribed areas corroded not excessive

Suspension component mounting prescribed area is corroded but not considered excessive chassis rails and suspension components (5.3.6 (a) (i))

Exhaust silencer slightly loose Tail pipe missing (8.1.1 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer not working (3.5 (a))

Exhaust silencer slightly loose Tail pipe missing (8.1.1 (b) (i))

Rear end tail pipe missing

Driver's airbag obviously inoperative (7.1.5 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear end tail pipe missing

Exhaust tailpipe missing

Driver's airbag obviously inoperative (7.1.5 (c))

Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Macpherson strut ball joint likely to become detached Excessive movement (5.3.4 (a) (ii)) DANGEROUS

Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust tailpipe missing

Brake performance not tested Brake fluid leak no brake pedal (3.7.A.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Braking system leaking (3.6.A.1)

Nearside rear brake binding (3.7.B.1)

Parking brake lever has no reserve travel (3.1.6b)

Centre Stop lamp not working (1.2.1b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear rear brake binding Both (3.7.B.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

advise outer sill covers fitted (unable to inspect outer sill panels for corrosion)

advise wear to both rear brake discs

multy grove belt cracked

wipers smear screen

advise inner and outer raised tread of both front tyres getting low

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)