2003 Honda Hr-v

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill And End Sill (5.3.6 (a) (i))

Offside Front Drive shaft damaged but serviceable Corrosion - Under Rubber Damper (6.1.7 (e))

Offside Front Lower Engine mounting damaged but not to excess Slightly Corroded (6.1.8 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill And End Sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced General Underbody (6.1.1 (c) (i))

Suspension component corroded but not seriously weakened All Components (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced also rear chassis areas. (6.1.1 (c) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced general (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Engine mounting damaged but not to excess corroded. (6.1.8 (a) (i))

Offside Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Passenger seat(s) missing at time of test ()

Gearbox mounting defective Has Slight Corrosion ()

Nearside Front Tyre worn close to legal limit/worn on edge Close (5.2.3 (e))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced General Underbody (6.1.1 (c) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Close (5.2.3 (e))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill End (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill End (5.3.6 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Close (5.2.3 (e))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Rear registration plate character(s) likely to be misread (6.3.4b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear number plate backing deteriorated.