2005 Toyota Landcruiser

Anti-roll bar attachment bracket/mounting insecure Both sides front at D clamp mounts. (5.3.3 (a) (i))

Emissions unable to be completed Due to poor condition of exhaust system. (8.2.2.2 (e))

Exhaust fumes entering cabin (6.1.2 (b) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Adjacent to ARB D clamp mount and body mount. Perforation is also evident behind undertray. (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake lining(s) incorrectly mounted Parking brake shoes insecurely mounted inside drum. Nearside pin fixing missing, offside pin fixing present but not fitted to shoe. (1.1.13 (c)) DANGEROUS

Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached Chassis rear crossmember above drawbar mount. (6.1.6 (i) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension component ball joint has slight play Uplift noted. (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced All body mount outriggers and crossmembers have flaking corrosion evident, under flaking paint. Some delamination of metal also evident in these areas, but no perforation noted. (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Both sides rear Bump stop mounts: Nearside delaminating, offside breaking apart. (6.1.1 (c) (i))

vehicle underside corrosion to various areas

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

vehicle underside corrosion to various areas

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

vehicle underside corrosion to various areas

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Exhaust has a major leak of exhaust gases back box has hole (6.1.2 (a))

Emissions not tested (8.2.2.2 (e))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe slightly corroded (3.6.B.2c)

rear upper cross member slightly corroded

Offside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

rear upper cross member slightly corroded

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear position lamp(s) not working (1.1.A.3b)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brakes imbalanced across an axle (3.7.B.5b)