2006 Toyota Aygo

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

surface corrosion front susupension

surface corrosion rear suspension

Front Headlamp aim projected beam image is obviously incorrect Both headlamps (4.1.2 (c))

Front Headlamp lens seriously defective Both front headlamps, lenses in poor condition, affecting beam patterns (4.1.1 (b) (ii))

Front Position lamp not working Both front lamps (4.2.1 (a) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Service brake lagging in operation Long pedal travel (1.2.1 (d))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin Approx 2-3mm (1.1.13 (a) (ii))

Front Coil spring corroded Both front springs (5.3.1 (b) (i))

Front Exhaust mounting defective Front mounting peg corroded/broken (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen wiper blade defective Juddering (3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Arm rear bush (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Pipe to flexi hose corroded (1.1.11 (c))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Seat belt webbing slightly damaged or frayed Slight damage (7.1.2 (b))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3-4mm Wearing inner edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material Pipe from rear flexi hose corroded (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material Pipe to flexi hose corroded (1.1.11 (c))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Coil spring corroded Both rear springs (5.3.1 (b) (i))

Rear Shock absorbers has slight external damage to the casing Both rear shocks, Casings corroded (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing corroded casing (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Registration plate does not conform to the specified requirements fixing is the wrong colour ref letter V (0.1 (d))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing corroded casing (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Exhaust mounting defective hanger broken off (6.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Exhaust mounting defective hanger broken off (6.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm 155/65/14 (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

slight pitting on both front discs