2007 Alfa Romeo 159

Exhaust heat shield insecure

Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Upper Steering linkage ball joint has slight play (2.1.3 (b) (i))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, but not excessively Both sides (1.1.14 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Exhaust heat shield insecure

Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Upper Steering linkage ball joint has slight play (2.1.3 (b) (i))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, but not excessively Both sides (1.1.14 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Exhaust system insecure (6.1.2 (a))

Nearside Rear Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Central Heat shield loose

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Windscreen washer not working (3.5 (a))

Gearbox mounting defective ()

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Sound deadening material not fully secure Heat shield (8.1.1 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Gearbox mounting defective ()

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Sound deadening material not fully secure Heat shield (8.1.1 (b) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Nail in offside rear tyre

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both rear tyres have cuts to outer sidewalls , no cords seen

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

nearside rear tyre close to legal limit on 2mm