2009 Ford Ka

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Lower Suspension arm pin or bush excessively worn arm rear bush (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill by axle mounting excessive corroded (5.3.6 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive arm rear mounting 30cm (5.3.6 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Engine MIL inoperative or indicates a malfunction mil light on (8.2.1.2 (h))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Lower Suspension arm pin or bush excessively worn arm rear bush (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive arm rear mounting 30cm (5.3.6 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Inner Road wheel badly distorted edge (5.2.2 (c) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill by rear beam axle mounting (5.3.6 (a) (i))

Nearside Front Inner Road wheel distorted edge (4.2.A.1a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp aim too high (1.8)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear tyre perishing

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear tyre perishing

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)