2002 Ford Transit

Brake valve leaking compensator (1.1.7 (d) (i))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Seat belt not functioning as intended (7.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most sill (5.3.6 (a) (i))

Nearside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength to inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Brake pedal anti-slip provision worn smooth (3.3.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Headlamp aim too high (1.8)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive chassis (3.3.A.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside chassis rail corroding

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside chassis rail corroding

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)

Some corrosion to offside front inner wheel arch but not within a prescribed area

Some rust to both rear wheel arches

Some rust to nearside outer sill panel but not within prescribed area

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Some corrosion to offside front inner wheel arch but not within a prescribed area

Some rust to both rear wheel arches

Some rust to nearside outer sill panel but not within prescribed area

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Suspension arm has excessive play in a pin/bush (2.4.G.2)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Corrosion starting to nearside rear wheel arch

Some corrosion to nearside sill panel drop plate but not within prescribed area

Offside rear bump stop corroded

Nearside Registration plate lamp not working (1.1.C.1d)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)