2003 Seat Leon

Rear Outer skin of rear exhaust corroded

Rear coil spring corroded Both (2.4.C.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' Stone chip (8.3.1a)

Front Headlamp aim too high Both (1.8)

Front Windscreen wiper does not clear the windscreen effectively Both (8.2.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Rear Direction indicator incorrect colour Both (1.4.A.2f)

Rear Outer skin of rear exhaust corroded

Rear coil spring corroded Both (2.4.C.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' Stone chip (8.3.1a)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear exhaust outer skin deteriorated

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear exhaust outer skin deteriorated

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

back box outer skin corroding

front heat shield insecure

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

back box outer skin corroding

both front tyres worn on edges perished and very close to limit

front heat shield insecure

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Headlamp aim too low (1.8)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Steering pivot point has slight play (2.2.B.1g)

Play in steering rack inner joint(s)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Steering pivot point has slight play (2.2.B.1g)

Play in steering rack inner joint(s)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Nearside Headlamp aim too low (1.8)

Offside Stop lamp not working (1.2.1b)

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Headlamp aim too low and too far to the left. (1.8)

Nearside Front Headlamp not working on dipped beam (1.7.5a)