2004 Fiat Doblo Cargo

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced body sill (7.1.1 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill (6.1.1 (c) (i))

Front both headlights lens fading

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Spare tyre defective ()

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Vehicle structure has slight corrosion inner body sill (6.1.A.1)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear rear brake application uneven (3.7.B.2)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Vehicle structure has slight corrosion inner body sill (6.1.A.1)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded centre outer sill (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded centre inner sill (2.4.A.3)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Non obligatory mirror damaged

Front registration plate deteriorated but not likely to be misread (6.3.1d)

rear bump stops slightly worn

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Hand operated control valve unit insecure (3.2.2a)

rear bump stops slightly worn