2012 Aprilia SR50

Front Brake pad(s) contaminated With oil (1.1.13 (b))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Stop lamp not working (4.3.1 (a) (ii))

Nearside Front Fork leaking

Front Mudguard insecure

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Rear Direction indicator lens defective which has no effect on emitted light Slightly loose but not insecure and functions as intended (4.4.1 (b) (i))

Offside Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Headlamp light intensity reduced (4.1.4 (a))

Nearside Brake lever is bent but brake can still be readily applied Rear brake lever (1.1.2 (d))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Front Shock absorber has a serious fluid leak Leaking on to brake caliper (5.3.2 (b))

Offside Front Brake cylinder operating mechanism has excessive travel Brake cylinder/lever (1.1.16 (e) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp light intensity reduced (4.1.4 (a))

Nearside Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Registration plate slightly loose (0.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear registration plate and bracket slightly loose but secure

Shock absorber has a light misting of oil Both front (5.3.2 (b))

Headlamp light intensity reduced (4.1.4 (a))

Nearside Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Offside Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear registration plate and bracket slightly loose but secure

Shock absorber has a light misting of oil Both front fork seals (5.3.2 (b))

Headlamp light intensity reduced (4.1.4 (a))

Nearside Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate slightly loose And bracket slightly loose (0.1 (a))

Headlamp light intensity reduced (4.1.4 (a))

Nearside Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Registration plate slightly loose And bracket slightly loose (0.1 (a))

Brake lever is bent but brake can still be readily applied Front operated (3.1.3c)

Brake lever is bent but brake can still be readily applied Rear operated (3.1.3c)

Front Wheel alignment slightly misaligned. (2.5.1)

Rear Mudguard insecure

Steering headbearing has slight free play (2.2.2)

Front Stop lamp does not illuminate immediately a brake applies Front operated (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies Rear operated (1.3.1a)

Brake lever is bent but brake can still be readily applied Front operated (3.1.3c)

Brake lever is bent but brake can still be readily applied Rear operated (3.1.3c)

Front Wheel alignment slightly misaligned. (2.5.1)

Rear Mudguard insecure

Steering headbearing has slight free play (2.2.2)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)