2016 Qingqi Qm

NUMBER PLATE DIGITS SLIGHTLY OVERSIZE

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear To much play in rear brake caliper

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel spoke excessively loose (5.2.2 (d))

Front Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Central Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear reflector defective or damaged by more than 50% of the reflecting surface faded (4.8.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Stop lamp not working off rear lever (4.3.1 (a) (ii))

Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain worn to excess (6.1.7 (c) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))