2001 Yamaha Yzf R6

Rear Lower Suspension component pin or bush likely to become detached tightened nuts (5.3.4 (a) (ii))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

MOUNTING BOLTS TO FRONT DISCS ASSEMBLED WITH COPPER GREASE, BOLTS NEED REMOVING CLEANING AND THREAD LOCK APPLIED

O/S position lamp inoperative

Offside Rear Upper Exhaust noisy (7.1.2)

chain adjuster missing O/S

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Brake disc(s) securing bolt(s) missing (3.2.A1g)

Headlamp aim too high (1.6)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Nearside Footrest insecure (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

No Number Plate Light Fitted

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nearside Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

The previously cracked frame has been welded by Sureweld Ltd.

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim too high (1.6)

Nearside Front Lower Motorcycle structure cracked (6.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)