2002 Mazda Bongo

Oil leak, but not excessive (8.4.1 (a) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch inner & outer (6.2.2 (d) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Drive shaft joint worn, but not excessively Prop shaft UJ (6.1.7 (c) (i))

Items removed from driver's view prior to test ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear light cluster is damaged

Front Windscreen washer not working (3.5 (a))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within the jacking point (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within the seat belt anchor (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within the suspension mounting (6.1.1 (c) (i))

Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear light cluster is damaged

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Windscreen washer not working (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn drop link (5.3.4 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within jacking point (6.1.1 (c) (i))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within seat belt anchor (6.1.1 (c) (i))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within suspension mounting (6.1.1 (c) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear light cluster is damaged

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear light cluster lens is damaged

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Windscreen wiper blade defective (3.4 (b) (i))

Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Front Windscreen washer not working (3.5 (a))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Rear fog lamp light intensity significantly reduced dimmer than the side light (4.5.4 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear light cluster lens is damaged

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes (5.3.4 (a) (i))

Spare tyre defective ()

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Spare tyre defective ()

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Items removed from driver's view prior to test ()

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)