2001 Honda CG125

Exhaust noisy (8.1.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear reflector missing (4.8.2 (a) (ii))

Headlamp light intensity reduced (4.1.4 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Front Direction indicator affected by the operation of another lamp (1.5.1c)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Rear reflector on motorcycle missing (1.4.1)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Battery excessivly flat

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front shock absorber has light misting of stanchion (2.3.3)

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Drive chain excessively loose (6.2.1d)

Drive chain fouling another component (6.2.1d)

Headlamp aim too high (1.6)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Front shock absorber has light misting of stanchion (2.3.3)

Exhaust slightly deteriorated (7.1.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust slightly deteriorated (7.1.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))