2001 Mitsubishi Galant

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Horn not working (7.7 (a))

Nearside Front Inner Passenger's seat with a defective structure floor to sill (6.2.6 (a) (i))

Offside Front Inner Driver's seat with a defective structure floor to sill (6.2.5 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Horn not working (7.7 (a))

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Inner Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Horn not working (7.7 (a))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

general corrosion underside

underside undersealed

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

underside heavily undersealed

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

underside heavily undersealed

Offside Front Inner Steering linkage ball joint has slight play (2.1.3 (b) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Play in steering rack inner joint(s) ()

under body corrosion

Nearside Rear Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner bay (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch pair (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch pair (5.3.6 (a) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Body has slight corrosion (6.1.B.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Horn control missing (1.6.1)

Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill (6.1.B.2)

Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Body has slight corrosion (6.1.B.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Service brake juddering severely (3.7.C.2)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

4x tyres all close to limit

Front Brake pad(s) wearing thin (3.5.1g)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Rear Registration plate lamp not working (1.1.C.1d)

Rear fog lamp not working (1.3.2b)

4x tyres all close to limit

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe inadequately supported (3.6.B.1) DANGEROUS

Rear Brake pad(s) wearing thin (3.5.1g)

both front tyres wearing low, worn on inner edges

corrosion to inner and outer sills

Nearside Front coil spring broken (2.4.C.1a)

Offside Front coil spring broken (2.4.C.1a)

both rear tyres worn on inner edges

slight leak on n/s rear shock absorber

slight play in steering rack n/s inner ball joint.

Nearside Ball joint has slight play (2.2.B.1f)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Ball joint has slight play (2.2.B.1f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Ball joint has slight play (2.2.B.1f)

Nearside Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Bonnet retaining device excessively deteriorated (8.4.2) DANGEROUS

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)