MOT Status
ExpiredMileage
292,384 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Fuel tank mount corroded on Nearside chassis rail
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill , sill end (5.3.6 (a) (i))
Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material front to rear by tank (1.1.11 (c))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Offside Front Outer Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive chassis rail upper face (1.1.21 (e) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive turret area (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive mount area (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake pipe corroded, covered in grease or other material front to rear by tank (1.1.11 (c))
Fuel cap/sealing device missing (6.1.3 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Offside Front Outer Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive chassis rail upper face (1.1.21 (e) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive turret area (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive mount area (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D-bushes (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer rear valance (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting / inner wheel arch (5.3.6 (a) (i))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D-bushes (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Play in steering rack inner joint(s) ()
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Seat belt slightly damaged (7.1.2 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch / load floor (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch / load floor (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Oil leak ()
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded inner chassis leg (2.4.A.3)
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded valance (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded front spring mount (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer chassis leg face (2.4.A.3)
Power steering fluid level below minimum (2.3.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch to floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch to floor (2.4.A.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Oil leak ()
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Horn not working (1.6.2a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
winscreen is marked and chiped
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
uneven wear on offside front tyre also spare is in same condition
Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
uneven wear on offside front tyre also spare is in same condition
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
2nd exhaust box deteriated
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Side body step damaged and corosion starting
n/s/r tyre 3-4mm
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front registration plate character(s) likely to be misread (6.3.4b)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS
How Reliable is the Ford Transit?
Based on 16,371,688 MOT tests across 1,454,648 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GX52 YMR is a 2002 Ford Transit in White with a 2,402cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 63.3%.
Across all 2002 Ford Transit models, the average MOT pass rate is 66.2% with a typical mileage of 114,966 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Transit fails its MOT is registration plate lamp not working, accounting for 551,926 recorded failures. If you're considering buying GX52 YMR, it's worth having these areas checked by a mechanic before committing.
The Ford Transit typically stays on UK roads for around 37 years. At 24 years old, this Ford Transit is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GX52 YMR?
You can check the full history of GX52 YMR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GX52 YMR registered?
GX52 YMR is a 2002 Ford Transit, first registered on 30 September 2002.
Is GX52 YMR safe to buy?
The MOT history for GX52 YMR shows 30 tests with a 63.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GX52 YMR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GX52 YMR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.