2003 Yamaha YQ50

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (4.1.3(i))

Direction indicators not working (1.5.1c)

Fairings insecure and likely to impede the steering (2.1.2e)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake lever insecure (3.1.2a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Throttle operating incorrectly (6.2.1f)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. (2.3.1)

Nail in rear tyre

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has inadequate damping effect. (2.3.6c)

Rear position lamp incorrect colour (1.1.2b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front wheel bearings have excessive free play (2.3.5b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre valve stem slightly damaged (4.1.2c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front Direction indicator deteriorated but function not impaired (1.5.3a)

dipswitch deteriorated

Headlamp aim too low (1.6)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Rear Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp incorrect colour (1.1.2b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Rear shock absorber seal failed and leaking oil (2.4.A.1c) DANGEROUS

Rear suspension bush has excessive free play (2.4.A2a(i)) DANGEROUS

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre valve stem slightly damaged (4.1.2c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Headlamp main beam warning lamp not working

Nearside Front Direction indicator deteriorated but function not impaired (1.5.3a)

dipswitch deteriorated

Front Front shock absorber has light misting of stanchion (2.3.3)

Speedo cable missing

Bolt missing from exhaust.

Bolts missing from drive cover.

Bolts missing from fairings

Brake lever pivots slightly worn (3.1.3a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front clocks/fairing loose.

Front forks slightly pitted

Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front An item not tested (Manual)

Front Brake disc(s) excessively scored (3.2.A1l) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b) DANGEROUS

Horn not loud enough to be heard by another road user (1.7.3a) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Bolt missing from exhaust.

Bolts missing from drive cover.

Bolts missing from fairings

Brake lever pivots slightly worn (3.1.3a)

Front clocks/fairing loose.

Front forks slightly pitted

Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Bike is dangerous and should not be used as lack of brakes.

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)