2006 Gilera Smt

Wheel alignment slightly misaligned. (2.5.1)

Headlamp aim too low (1.6)

Nearside Front Direction indicators not working (1.5.1c)

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Rear suspension bearing has excessive free play Swing arm bearings (2.4.A2a(i))

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride Front sprocket insecure (6.2.1h) DANGEROUS

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

number plate slightly deteriorated.

Headlamp aim too low (1.6)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake lever is short but brake can still be readily applied (3.1.3c)

no kick starter or electric start.

number plate slightly deteriorated.

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Headlamp aim too high (1.6)

Nearside Front Direction indicator not working (1.5.1c)

Offside Front Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear position lamp missing (1.1.1a)

Rear suspension bush has excessive free play (2.4.A2a(i))

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

ignition faulty and does not switch off engine.

number plate slightly deteriorated.

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Horn not working (1.7.3a)

Rear reflector on motorcycle missing (1.4.1)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Drive chain worn to excess (6.2.1e)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain worn to excess (6.2.1e)

Rear Exhaust is leaking and excessively noisey (7.1.1b)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)