2007 Jaguar S-type

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension rod ball joint dust cover severely deteriorated both sides rear (5.3.4 (b) (i))

Tyre worn close to legal limit/worn on edge both front on inner edge (5.2.3 (e))

Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Tyre worn close to legal limit/worn on edge both rear + o/s/f (5.2.3 (e))

rear tyres split + perished

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Tyre worn close to legal limit/worn on edge both rear (5.2.3 (e))

n/s/r tyre slightly perished

Nail in tyre both rear ()

Front brake disc worn, pitted or scored, but not seriously weakened slightly lipped (3.5.1i)

Offside Rear Outer CV boot appears to be leaking grease

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 21% (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened slightly lipped (3.5.1i)

Nearside Front Tyre worn close to the legal limit 2mm, heavily worn on inner edge, damaged on outer sidewall (4.1.E.1)

Offside Rear Outer CV boot appears to be leaking grease

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Inner tyre edge worn

Nearside Front Outer sidewall has cut/tear but not exposing any ply or cords

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Front Inner tyre edge worn

Rear Brake pad(s) wearing thin (3.5.1g)

unable to clearly inspect front and rear inner pad's

Engine covers fitted obscuring some components in the engine bay

Offside Front position lamp(s) not working (1.1.A.3b)

Under-trays fitted obscuring some underside components

front wiper blades split but still clearing screen

rear tyres wearing close to the tread wear indicators (3mm)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

front wiper blades split but still clearing screen

rear tyres wearing close to the tread wear indicators (3mm)

Headlamp aim too high (1.8)