MOT Status
ExpiredMileage
73,557 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake disc worn, pitted or scored, but not seriously weakened Front and rear (1.1.14 (a) (ii))
Brake pipe corroded, covered in grease or other material Covered in materials (All) (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Suspension component corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Emissions not tested (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Front Suspension arm corroded but not seriously weakened all suspension arms (5.3.3 (b) (i))
Front wheel hubs/bearing carriers corroded
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Suspension arm corroded but not seriously weakened all suspension arms (5.3.3 (b) (i))
under side of vehicle heavily wax oiled
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill/lips (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive rear suspension heavily corroded (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive plastic covers fitted covering sills (5.3.6 (a) (i))
all brake pipes covered in waxoil
under body heavily corroded
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both rear in side faces (1.1.14 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
unable to fully inspect sills due to plastic covers fitted
under vehicle heavily wax oiled
Nearside Headlamp aim too low and too far to the right. (4.1.2 (a))
Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both rear in side faces (1.1.14 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
exhaust heavily corroded
unable to fully inspect sills due to plastic covers fitted
under side heavily corroded
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills and sill lips (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills and sill lips (2.4.A.3)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
rear exhaust corroded but not blowing
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pad(s) wearing thin (3.5.1g)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Lexus GS430?
Based on 15,178 MOT tests across 914 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GY02 UWM is a 2002 Lexus GS430 in Bronze with a 4,293cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 80%.
Across all 2002 Lexus GS430 models, the average MOT pass rate is 79.3% with a typical mileage of 85,835 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Lexus GS430 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 473 recorded failures. If you're considering buying GY02 UWM, it's worth having these areas checked by a mechanic before committing.
The Lexus GS430 typically stays on UK roads for around 26 years. At 24 years old, this Lexus GS430 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GY02 UWM?
You can check the full history of GY02 UWM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GY02 UWM registered?
GY02 UWM is a 2002 Lexus GS430, first registered on 15 May 2002.
Is GY02 UWM safe to buy?
The MOT history for GY02 UWM shows 20 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GY02 UWM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GY02 UWM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.