MOT Status
ExpiredMileage
195,257 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material all 4 plus centre (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
all 4 tyres perrished
both outer sills coroded
both sides inner wheel ach corroded upper
rear quater sill corred both sides
Both rear quarter outer sills corroded - not within prescribed area
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust has a minor leak of exhaust gases rear tailpipe (6.1.2 (a))
Front Exhaust has a minor leak of exhaust gases flexi pipe (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both front upper wheel arches (5.3.6 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake cable damaged but not to excess both rear handbrake cables moving in drum fixing points (1.1.15 (a))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
both outer sills slight corrosion
Nearside Front Lower Suspension arm pin or bush excessively worn front lower arm - rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis by rear leaf spring mount (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn front lower arm - front bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength upper chassis leg (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outrigger (5.3.6 (a) (i))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Both rear quarter outer sills corroded - not within prescribed area
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust has a minor leak of exhaust gases rear tailpipe (6.1.2 (a))
Front Exhaust has a minor leak of exhaust gases flexi pipe (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both front upper wheel arches (5.3.6 (a) (i))
Nearside Front Headlamp aim too low and too far to the left. (4.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front lower arm front bush (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm - rear bush (5.3.4 (a) (i))
Rear Brake cable damaged but not to excess both rear handbrake cables moving in drum fixing points (1.1.15 (a))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
both outer sills slight corrosion
Front Exhaust has a minor leak of exhaust gases front flexi pipe (6.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms - rear bushes splitting (5.3.4 (a) (i))
Nearside Front inner wheel / sill corroded but not within prescribed area
Nearside Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
coolant level below min
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))
Nearside Rear Position lamp adversely affected by the operation of another lamp light effected when indicator on (4.2.3 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch towards rear - behind wheel (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger/ chassis by rear leaf spring mounting point (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength leaf spring- front mount area- along / up chassis into inner wheel arch area (5.3.6 (a) (i))
Offside Rear Position lamp adversely affected by the operation of another lamp rear fog lamp/ stop light issue (4.2.3 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring- front mount area- along chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger/ chassis by rear leaf spring mounting point (5.3.6 (a) (i))
Rear Service brake excessively fluctuating (1.2.1 (e))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Front Exhaust has a minor leak of exhaust gases front flexi pipe (6.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms - rear bushes splitting (5.3.4 (a) (i))
Nearside Front inner wheel / sill corroded but not within prescribed area
Nearside Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
coolant level below min
Front Suspension arm pin or bush worn but not resulting in excessive movement both lower front arms , rear bushes (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both front tyres (5.2.3 (e))
Nearside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis rails inner sides (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Tyre worn close to legal limit/worn on edge both rear tyres wearing on inner edge/ tyres cracking (5.2.3 (e))
Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside front inner sills , not within prescribed areas (5.3.6 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer chassis leg above axle , behind rear wheel (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outrigger by n/s/r leaf spring rear mount (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg by front or o/s/r leaf spring (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger by o/s/r leaf spring rear mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer chassis leg above axle , behind rear wheel (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both lower front arms , rear bushes (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both front tyres (5.2.3 (e))
Nearside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Tyre worn close to legal limit/worn on edge both rear tyres wearing on inner edge/ tyres cracking (5.2.3 (e))
Suspension component mounting prescribed area is corroded but not considered excessive both rear inner chassis legs above axle , behind rear wheel (5.3.6 (a) (i))
Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Power steering inoperative (2.1.5 (c) (i))
Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
windsreen cracked outside drivers view
Nearside Front Seat belt retracts slowly
Offside Rear Chassis slighhtly corroded
Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill (2.4.A.3)
Offside Registration plate lamp not working And cover missing (1.1.C.1d)
front brake application uneven 40% (3.7.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Seat belt retracts slowly
Nearside Headlamp aim too far to the right (1.8)
Offside Headlamp aim too far to the right (1.8)
Offside Rear Chassis slighhtly corroded
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' strong advise (8.3.1a)
engine smokey
off side front tyre wearing on edges
oil leak and oil light on
slight nocking from front near side suspension
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Registration plate lamp not working both (1.1.C.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' strong advise (8.3.1a)
engine smokey
off side front tyre wearing on edges
oil leak and oil light on
slight nocking from front near side suspension
Brake pedal anti-slip provision incomplete (3.3.A.1b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear wheel bearing has slight play (2.6.2)
service light on
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
offside rear mudflap insecure
service light on
slight damaged to nearside front tyres sidewall
Parking brake lever has little reserve travel (3.1.6b)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has little reserve travel (3.1.6b)
Oil leak
Vehicle structure has slight corrosion (6.1.A.1)
exhaust deteriorated
front brake imbalance at 23%
n/s/f tyre outer wall damaged
n/s/r outer sill corroded
Nearside Seat belt damaged but webbing not significantly weakened (5.2.2a)
Front registration plate character(s) likely to be misread (6.3.4b)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Nearside Windscreen wiper blade deteriorated (8.2.2)
Offside Front Obligatory mirror seriously deteriorated, affecting the rear view (8.1.2a)
Offside Windscreen wiper blade deteriorated (8.2.2)
How Reliable is the Ford Transit?
Based on 16,371,688 MOT tests across 1,454,648 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GY03 UBM is a 2003 Ford Transit in Red with a 1,998cc diesel engine. This vehicle has been through 33 MOT tests with a personal pass rate of 57.6%.
Across all 2003 Ford Transit models, the average MOT pass rate is 66.7% with a typical mileage of 108,242 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Transit fails its MOT is registration plate lamp not working, accounting for 551,926 recorded failures. If you're considering buying GY03 UBM, it's worth having these areas checked by a mechanic before committing.
The Ford Transit typically stays on UK roads for around 37 years. At 23 years old, this Ford Transit is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GY03 UBM?
You can check the full history of GY03 UBM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GY03 UBM registered?
GY03 UBM is a 2003 Ford Transit, first registered on 29 March 2003.
Is GY03 UBM safe to buy?
The MOT history for GY03 UBM shows 33 tests with a 57.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GY03 UBM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GY03 UBM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.