2006 Toyota Aygo

Front Exhaust mounting defective (6.1.2 (a))

Front Inner Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Rear heat shield insecure

Rear shock absorbers corrosion to casings both

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Front Inner Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Rear heat shield insecure

Rear shock absorbers corrosion to casings both

both front tyres worn on edges

both rear outer sill starting to corrode

brake servo rusting

shockers rusting

wishbone and rear suspension rubbers starting to perish

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases where back box connects to centre pipe (7.1.2)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

rear tyres cracking between tread

Front front brake application uneven (3.7.B.2)

Exhaust has a minor leak of exhaust gases where back box connects to centre pipe (7.1.2)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear tyres cracking between tread

Front wiper blade starting to split.

rear silencer is supported by a temporary mounting bracket.

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)