MOT Status
ExpiredMileage
60,983 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front wheel arch loose.
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Steering system slightly tight (2.2.D.1)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Anti-roll bar has excessive play in a ball joint link (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Inner Tyre worn close to the legal limit tread very low . (4.1.E.1)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Inner Tyre worn close to the legal limit tread very low. (4.1.E.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front wheel arch loose.
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Steering system slightly tight (2.2.D.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front wheel arch loose.
Offside Headlamp has a product on the light source but not seriously reducing light output water in lens. (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Road wheel with a slightly distorted bead rim (4.2.A.1a)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust system not adequately supported box mounting. (7.1.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit inner tread (4.1.E.1)
Offside Front wheel arch loose.
Offside Headlamp has a product on the light source but not seriously reducing light output water in lens. (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Road wheel with a slightly distorted bead rim (4.2.A.1a)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin 80% worn (3.5.1g)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement D bush has slight play (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
rear exhaust silencer mounts are corroded
Offside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded sill corroded within 30cm of seat mount (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded sill corroded within 30cm of subframe mount (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin aprox 80% worn (3.5.1g)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement D bush has slight play (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
rear exhaust silencer mounts are corroded
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside sill corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside front wiper blade split
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside front wiper blade split
Offside sill corroded
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nail in offside front tyre
n/s/f tyre worn on inner edge
o/s/f tyre worn smooth on inner edge
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Damage to Offside front door
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Damage to Offside front door
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front brake disc excessively scored (3.5.1h)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too low (1.8)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GY06 UCO is a 2006 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 52.6%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying GY06 UCO, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GY06 UCO?
You can check the full history of GY06 UCO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GY06 UCO registered?
GY06 UCO is a 2006 Ford Ka, first registered on 31 March 2006.
Is GY06 UCO safe to buy?
The MOT history for GY06 UCO shows 19 tests with a 52.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GY06 UCO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GY06 UCO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.