Free Car Check
2010 Lexus RX450H
MOT Status
ValidMileage
151,305 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened NS & OS (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (swivel mount) (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (swivel mount) (5.3.4 (a) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened NS & OS (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (swivel mount) (5.3.4 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (swivel mount) (5.3.4 (a) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim too high and too far to the right. (4.1.2 (a))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near Lower arm mount (5.3.6 (a) (i))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Headlamp aim too high and too far to the right. (4.1.2 (a))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near lower arm mount (5.3.6 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened NS & OS (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (swivel mount) (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (swivel mount) (5.3.4 (a) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge Tread depth below 2mm. Only just meets legal requirement. (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge 2mm tread remaining (5.2.3 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge Worn on outer edge (5.2.3 (e))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced Underside sills, floors and component mounting areas corroded (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Rear subframe all mounting areas corroded (5.3.6 (a) (i))
Nearside Windscreen washer not working (3.5 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Body component damaged and likely to cause injury Light cluster lens broken (6.2.1 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm Tyre worn through on outer edge. (5.2.3 (e)) DANGEROUS
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge Tread depth below 2mm. Only just meets legal requirement. (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge 2mm tread remaining (5.2.3 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge Worn on outer edge (5.2.3 (e))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced Underside sills, floors and component mounting areas corroded (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Rear subframe all mounting areas corroded (5.3.6 (a) (i))
Exhaust heat shield loose, resting on silencer.
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened Upper and Lower arms corroded. (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush. (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened Upper and lower arms corroded. (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Reversing lamp inoperative (4.6.1 (a))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Exhaust heat shield loose, resting on silencer.
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened Upper and Lower arms corroded. (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush. (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge tread depth @ 2mm. (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened Upper and lower arms corroded. (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
windscreen cracked outside checked zones
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Lexus RX450H?
Based on 114,223 MOT tests across 8,014 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GY10 DWO is a 2010 Lexus RX450H in Black with a 3,456cc hybrid electric (clean) engine. This vehicle has been through 14 MOT tests with a personal pass rate of 57.1%.
Across all 2010 Lexus RX450H models, the average MOT pass rate is 84.1% with a typical mileage of 78,322 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Lexus RX450H fails its MOT is shock absorber has a serious fluid leak, accounting for 999 recorded failures. If you're considering buying GY10 DWO, it's worth having these areas checked by a mechanic before committing.
The Lexus RX450H typically stays on UK roads for around 20 years. At 16 years old, this Lexus RX450H is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GY10 DWO?
You can check the full history of GY10 DWO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GY10 DWO registered?
GY10 DWO is a 2010 Lexus RX450H, first registered on 27 April 2010.
Is GY10 DWO safe to buy?
The MOT history for GY10 DWO shows 14 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GY10 DWO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GY10 DWO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.