2011 Yamaha Yzf

Exhaust noisy Aftermarket end can fitted (8.1.1 (a))

Stop lamp switch does not operate in accordance with the requirements Requires extreme pressure to operate rear brake light (4.3.2 (a) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement Rear shock to swing arm linkage has slight play (5.3.4 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Tyre worn close to the legal limit 2.0 mm (5.2.3 (e))

Suspension arm pin, bush or joint worn but not resulting in excessive movement rear suspension linkage, slight movement. (5.3.4 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake indicates slight fluctuation of brake effort Disc warped (1.2.1 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear reflector on motorcycle missing (1.4.1)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Direction indicators not working (1.5.1c)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Front mud gaurd missing

Nearside switch gear loose

Offside steering lock stop deteriorated

Steering headbearing has slight free play (2.2.2)

rear brake fluid level low

Front mudguard section missing

Front tyre depth low

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear number plate deteriorated but not likely to be misread

Rear suspension lightly rubbing not affecting the movement of the rear suspension exhaust silencer (2.4.A.3a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Headlamp aim too high (1.6)

Front Roller brake test indicates a binding brake (3.3.A1a)

Indicator switch insecure (1.5.4)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Drive chain slightly loose dry of lubricant (6.2.1d)

Front mudguard section missing

Front tyre depth low

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear number plate deteriorated but not likely to be misread

Rear suspension lightly rubbing not affecting the movement of the rear suspension exhaust silencer (2.4.A.3a)

Front Roller brake test indicates a binding brake (3.3.A1a)