2013 Honda Msx 125-D

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front brake lever rough in operation

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Drive chain sprocket worn to excess front (6.1.7 (c) (i))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b))

Rear Rear reflector missing (4.8.2 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake caliper inadequately mounted and braking performance affected seized (1.1.16 (c) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)