2004 Seat Altea

Items removed from driver's view prior to test From rear view mirror ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Items removed from driver's view prior to test From rear view mirror ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Rear fog lamp switch inoperative (4.5.3 (a))

Coolant leak ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Items removed from driver's view prior to test From rear view mirror ()

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Stop lamp(s) lens defective which has no effect on emitted light Condensation on inside of unit (4.3.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Coolant leak ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Items removed from driver's view prior to test From rear view mirror ()

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Stop lamp(s) lens defective which has no effect on emitted light Condensation on inside of unit (4.3.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Towball/hitch not fitted at time of test ()

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Towball/hitch not fitted at time of test ()

Towball/hitch not fitted at time of test ()

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic power steering warning lamp indicates a system malfunction (2.6 (a))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Towball/hitch not fitted at time of test ()

Nearside Front Brake pad(s) wearing thin at about 2mm also discs liped (3.5.1g)

Nearside Front Tyre worn close to the legal limit also bald on inner edge (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

o/s/f tyre 2mm

side skirts and floor covers fitted

Emissions not tested (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too high (1.8)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp aim so that beam "kick up" is not visible on the screen (1.8.B.1)

Offside Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Brake pad(s) wearing thin at about 2mm also discs liped (3.5.1g)

Nearside Front Tyre worn close to the legal limit also bald on inner edge (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

side skirts and floor covers fitted

n/s front and n/s rear tyres within limits but worn at inner edges

Nearside Headlamp aim too low (1.8)

n/s front and n/s rear tyres within limits but worn at inner edges

Rear Brake pad(s) wearing thin (3.5.1g)

n/s/f n/s/r tyre edges worn

n/s/r brake binding slightly

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

n/s/f n/s/r tyre edges worn

n/s/r brake binding slightly

exhaust system rusted heavily

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

airbag light on

nearside front tyre worn very low on tread on inner edge

nearside rear tyre nail in tread

offside front tyre devoid of tread on inner edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)