2004 Fiat Panda

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Bump stop mounting area corroded.

Rear Reverse lamp not working.

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp aim projected beam image is obviously incorrect Headlamp lens requires cleaning as now projecting an incorrect image. (4.1.2 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust Lambda reading after 2nd fast idle outside specified limits Most likely due to exhaust blow. (8.2.1.2 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Bump stop is resting within spring after falling from mount.

Nearside Rear Last metal brake pipe is has lumps under plastic coating which may indicate corrosion.

Offside Rear Bump stop mounting area corroded.

Rear Exhaust has a minor leak of exhaust gases Hole by joint to back box. (6.1.2 (a))

Rear Reverse lamp not working.

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Windscreen washer not working (3.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn on inner and outer edges (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing Cracking between treads, sidewall perished (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn on inner and outer edges (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing Cracking between treads, sidewall perished (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Play in steering rack inner joint(s)

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Windscreen washer not working (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Items removed from driver's view prior to test

Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

O/S AND N/S INNER FRONT TYRE WORN HEAVY, INNER EDGE'S NEAR CORD'S

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

o/s/f tyre worn smooth on inner edge

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

o/s/f tyre worn smooth on inner edge

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)

Offside Rear rear brake binding (3.7.B.1)

Rear rear brake application uneven (3.7.B.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

front brake discs lipped and corroded

front wipers smear

offside rear tyre low

Braking system leaking (3.6.A.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake discs lipped and corroded

front wipers smear

offside rear tyre low

Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)