2006 Citroen C2

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

both inner sills corroded at front

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Windscreen damaged and affecting the driver's view of the road scratches (3.2 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

both inner sills corroded at front

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

coolant bottle empty

Hazard warning switch inoperative (4.4.2 (a) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

coolant bottle empty

Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Nail in tyre ()

Rear Exhaust has a minor leak of exhaust gases close to excessive (6.1.2 (a))

Rear exhaust strap broken

corrosion to front and rear inner sills

corrosion to nearside front outer sill

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Nail in tyre ()

Rear Exhaust has a minor leak of exhaust gases close to excessive (6.1.2 (a))

Rear exhaust strap broken

corrosion to front and rear inner sills

corrosion to nearside front outer sill

Rear Exhaust mounting defective Rear exhaust bracket snapped. (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Corroded hole in seal. (7.1.1 (a) (i))

Rear Exhaust mounting defective Rear exhaust bracket snapped. (6.1.2 (a))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear bump stop missing

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear bump stop missing

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust silencer in poor condition

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear bump stop missing

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear bump stop missing

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust silencer in poor condition

Nearside Rear bump stop missing

Offside Rear bump stop missing

Oil leak ()

Both rear bump stops missing

Rear silencer deteriorated

Rear bump stops missing

oil leak

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Headlamp aim too high (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear bump stops missing

oil leak

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too low (1.8)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front brake discs slightly pitted/worn

rear footbrake showing slight imbalance

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)