MOT Status
ValidMileage
90,478 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Side skirt (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Nail in tyre
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Nail in tyre
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust has a major leak of exhaust gases Front and rear (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis by bump stop (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis by bump stop (5.3.6 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Outer sill heavily corroded outside prescribed area
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
both front suspension arm rearmost bushes deteriorated
corrosion to front sub frame
corrosion to rear inner sills and chassis
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Direction indicator slightly discoloured close to excessive (4.4.3 (a))
corrosion to inner sills
corrosion to rear chassis
front subframe corroded
Exhaust emissions exceed manufacturer's specified limit 2.54 (8.2.2.2 (a))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Direction indicator slightly discoloured close to excessive (4.4.3 (a))
corrosion to inner sills
corrosion to rear chassis
front subframe corroded
Offside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
NSF tyre close to limit
Brakes imbalanced across an axle (3.7.B.5b)
Nearside front brake juddering slightly (3.7.A.2b)
Offside front brake juddering slightly (3.7.A.2b)
How Reliable is the Citroen C2?
Based on 965,161 MOT tests across 61,057 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GY56 GVD is a 2006 Citroen C2 in Blue with a 1,398cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 78.3%.
Across all 2006 Citroen C2 models, the average MOT pass rate is 71.0% with a typical mileage of 58,127 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Citroen C2 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 38,269 recorded failures. If you're considering buying GY56 GVD, it's worth having these areas checked by a mechanic before committing.
The Citroen C2 typically stays on UK roads for around 23 years. At 20 years old, this Citroen C2 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GY56 GVD?
You can check the full history of GY56 GVD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GY56 GVD registered?
GY56 GVD is a 2006 Citroen C2, first registered on 28 September 2006.
Is GY56 GVD safe to buy?
The MOT history for GY56 GVD shows 23 tests with a 78.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GY56 GVD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GY56 GVD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.