MOT Status
ExpiredMileage
155,794 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch by shocker mount (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Front Anti-roll bar insecurely attached (5.3.3 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front inner wings corroded to excess outside the prescribed area
Nearside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Underside, suspension brakes and steering components corroded and weak
fuel pipes corroded
Headlamp aim too high both (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Rear Brake pipe excessively corroded both (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Service brake efficiency below requirements (1.2.2 (a) (i))
Central Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear fog lamp not working (1.3.2b)
Rear Exhaust has a major leak of exhaust gases box (7.1.2)
Registration plate lamp not working both (1.1.C.1d)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
front exhaust bracket slightly corroded
rear trailing lower arms corroded but not excessive
Fuel pipe/s corroded
Oil leak
Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)
Centre Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Centre Rear Exhaust system not adequately supported (7.1.1)
Centre Rear registration plate deteriorated (6.3.1d)
Nearside Front Headlamp aim too low (1.8)
Nearside Rear Brake hose twisted (3.6.B.4c)
Offside Rear Brake hose twisted (3.6.B.4c)
Offside Rear passenger door does not latch securely closed (6.2.B.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
both rear subframe front bushes defective not supporting subframe to vehicle
Nearside Front Headlamp aim too low (1.8)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)
Nearside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake hose excessively deteriorated (3.6.B.4d)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear brake disc slightly scored (3.5.1h)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear brake disc slightly scored (3.5.1h)
o/s/r steel brake pipe becoming corroded from t joint to flexi brake hose † †both rear beake discs becoming corroded
slight play in steering rack
How Reliable is the BMW 3 Series?
Based on 12,840,406 MOT tests across 1,004,285 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H112 SVF is a 1991 BMW 3 Series in Red with a 1,796cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 1991 BMW 3 Series models, the average MOT pass rate is 66.7% with a typical mileage of 122,236 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 3 Series fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 485,475 recorded failures. If you're considering buying H112 SVF, it's worth having these areas checked by a mechanic before committing.
The BMW 3 Series typically stays on UK roads for around 37 years. At 35 years old, this BMW 3 Series is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H112 SVF?
You can check the full history of H112 SVF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H112 SVF registered?
H112 SVF is a 1991 BMW 3 Series, first registered on 2 January 1991.
Is H112 SVF safe to buy?
The MOT history for H112 SVF shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H112 SVF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H112 SVF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.