1991 Yamaha Fzr

Exhaust noisy (8.1.1 (a))

Nearside Handlebar is loose on mount

Offside Bolt missing from infill

Offside Frame is polished through but not structural

Offside Handlebar is loose on mount

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Solo seat fitted at time of test, pillion footrests inoperable

Exhaust noisy (8.1.1 (a))

Nearside handlebar has looseness on mount

Offside frame is polished through but not structural

Offside handlebar has looseness on mount

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Frame has been polished through but not structural

Nearside handlebar has a looseness on mount

Offside handlebar has a looseness about the clamp

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement suspension linkage (5.3.4 (a) (i))

solo seat fitted at time of test, pillion footrests inoperable

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Frame has been polished through but not structural

Nearside handlebar has a looseness on mount

Offside handlebar has a looseness about the clamp

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement suspension linkage (5.3.4 (a) (i))

solo seat fitted at time of test, pillion footrests inoperable

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bearing has slight free play (2.4.A2a(i))

front mud gaurd cracked around mountings but secure

rear shock absorber weak

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake disc(s) excessively worn (3.2.A1l)

Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension component slightly corroded. (2.4.A.1a)

handlebars slightly loose

Front Front shock absorber seal failed and leaking oil (2.3.3)