1991 Rover Mini

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate missing (0.1 (a))

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper not working (3.4 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Upper Suspension arm pin or bush excessively worn inner (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Offside Front Wheel/tyre protruding beyond wheel arch wheel arch missing

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Side repeater not working (1.4.A.2c)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Shock absorber has negligible damping effect (2.7.5)

Nearside Headlamp aim too high (1.8)

Nearside Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Shock absorber has negligible damping effect (2.7.5)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Steering column retaining device insecure (2.1.6)

Steering column top mounting bracket insecure (2.1.2d)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Horn not working (1.6.2a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Brake pipe excessively corroded (3.6.B.2c)

Hazard warning switch faulty (1.4.B.1d)

Nearside Side repeater insecure (1.4.A.2b)

Nearside front brake juddering severely (3.7.A.2b)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

general underbody corosion

Front front brake juddering severely (3.7.A.2b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Direction indicator incorrect colour (1.4.A.2f)