1991 Peugeot Express

Exhaust mounting defective Rubber mounts worn (6.1.2 (a))

Front Coil spring corroded Both (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Wheel bearing has slight play Both sides (5.1.3 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

underside of vehicle corroded

wiring for lights in poor condition.

Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to fuel tank (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Obligatory mirror slightly loose bolt missing (3.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive front mounting of rear spring (5.3.6 (a) (i))

Wheel bearing has slight play all 4 (5.1.3 (a) (i))

chassis corrosion

exhaust system corroded

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Exhaust system insecure all (6.1.2 (a))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch - top mount area (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect blur (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger - front of 2 (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch area (5.3.6 (a) (i))

Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i))

Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Windscreen washer not working (3.5 (a))

Exhaust system corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Obligatory mirror slightly loose bolt missing (3.3 (b) (i))

Wheel bearing has slight play All 4 (5.1.3 (a) (i))

chassis corroded

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front front brake disc's slight corroded

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front front brake disc's slight corroded

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Front Brake pipe inadequately supported both (3.6.B.1)

Front Headlamp aim beam image kick up to the offside both (1.8)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Headlamp aim beam image kick up to the offside (1.8)

Front Headlamp incorrect colour (1.7.5b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Leaf spring anchor bracket corroded and seriously weakened (2.4.B.6d)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear fog lamp not working (1.3.2b)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front suspension has a suspension lower ball joint securing nut loose (2.5.B.1a)

Nearside Front suspension has a suspension lower ball joint securing nut not locked (2.5.B.1a)

Offside Front suspension has a suspension lower ball joint securing nut loose (2.5.B.1a)

Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Centre Fuel system component insecure (7.2.1)

Nearside Front Brake pipe inadequately clipped (3.6.B.1)

Nearside Front Radius arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Radius arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)