MOT Status
ExpiredMileage
186,540 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Valve stem slightly misaligned (4.1.D.1e)
all weld repairs heavily coated with protective underseal and unable to fully assess said repairs
slight binding on both rear wheels
Exhaust system not adequately supported (7.1.1)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Valve stem slightly misaligned (4.1.D.1e)
slight binding on both rear wheels
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front crossmember corroded
number plates spacing slightly greater than normal and has honeycombe backround
slight bind on both rear wheels
welo repairs covered with protective underseal and unable to fully assess
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front crossmember corroded
number plates spacing slightly greater than normal and has honeycombe backround
slight bind on both rear wheels
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Macpherson strut corroded and seriously weakened (2.4.G.1)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Registration plate lamp not working (1.1.C.1d)
rear brake binding (3.7.B.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Front registration plate character(s) incorrectly spaced (6.3.4a)
Nearside Front Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Headlamp aim beam image kick up to the offside (1.8)
Rear registration plate character(s) incorrectly spaced (6.3.4a)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake pipes covered in a plastic coat Unable to fully inspect !
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Headlamp aim not tested (1.8.A.1c)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H12 CLL is a 1995 Mazda 323 in Green with a 1,489cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 54.5%.
Across all 1995 Mazda 323 models, the average MOT pass rate is 63.0% with a typical mileage of 98,590 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying H12 CLL, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 31 years old, this Mazda 323 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H12 CLL?
You can check the full history of H12 CLL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H12 CLL registered?
H12 CLL is a 1995 Mazda 323, first registered on 31 December 1995.
Is H12 CLL safe to buy?
The MOT history for H12 CLL shows 11 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H12 CLL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H12 CLL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.