MOT Status
ExpiredMileage
89,337 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
numerous underbody/structural welded repair patches . heavily undersealed all seem secure and sound
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe inappropriately repaired (3.6.A.3)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Body has a sharp edge caused by damage (6.1.C.1)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pipe inadequately supported (3.6.B.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Brake pipe inappropriately repaired (3.6.A.3)
Offside Front Ball joint has excessive play (2.2.B.1f)
Offside Front Electrical wiring insecure (1.9.2a)
Offside Front Headlamp insecure (1.7.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Inner faces of both front discs are in poor condition/delaminating/corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front brake juddering slightly (3.7.A.2b)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside front brake grabbing slightly (3.7.A.2b)
Oil leak
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
high level stop light-3 bulbs inoperative
offside front tyre wearing on inner edge
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front brake juddering slightly (3.7.A.2b)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside front brake grabbing slightly (3.7.A.2b)
Oil leak
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
high level stop light-3 bulbs inoperative
offside front tyre wearing on inner edge
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front wheel bearing has excessive play (2.5.A.3c)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front brake recording little or no effort (3.7.B.5a)
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Steering system has slight free play detected at steering wheel (2.2.A.1b)
Both offside tyres wearing edges.
General underside corrosion.
Offside front outer anti roll bar bush worn.
Part of high level stop lamp not working.
Slight noise from offside rear wheel bearing.
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Brake load sensing valve linkage seized (3.6.E.3)
Offside Front coil spring fractured (2.4.C.1a)
Front brake disc slightly scored (3.5.1h)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Registration plate lamp not working (1.1.5c)
Non obligatory mirror damaged
Brake linkage corroded but not seriously weakened (3.5.1e)
How Reliable is the Renault Megane?
Based on 7,306,346 MOT tests across 596,780 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H12 PEO is a 1998 Renault Megane in Red with a 1,598cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 57.1%.
Across all 1998 Renault Megane models, the average MOT pass rate is 63.6% with a typical mileage of 81,964 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Renault Megane fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 358,622 recorded failures. If you're considering buying H12 PEO, it's worth having these areas checked by a mechanic before committing.
The Renault Megane typically stays on UK roads for around 30 years. At 28 years old, this Renault Megane is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H12 PEO?
You can check the full history of H12 PEO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H12 PEO registered?
H12 PEO is a 1998 Renault Megane, first registered on 31 December 1998.
Is H12 PEO safe to buy?
The MOT history for H12 PEO shows 14 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H12 PEO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H12 PEO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.