MOT Status
ValidMileage
154,593 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge outside edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
under body heater pipes are showing signs of corrosion
Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive backing and outer sill (5.3.6 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
under body heater pipes are corroded
Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/backing sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Inner Anti-roll bar pin or bush excessively worn wrap around 'd' (5.3.4 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Anti-roll bar pin or bush worn but not resulting in excessive movement wrap around 'd' (5.3.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Suspension component mounting prescribed area is corroded but not considered excessive backing and outer sills (5.3.6 (a) (i))
under body heater pipes are corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outrigger (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement wrap around 'd' (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive outer and backing sills (5.3.6 (a) (i))
under body metal heater pipes are corroded
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear brake pads have 2000-3000 miles remaining approximately.
Underside of vehicle generally corroded/undersealed.
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Driver's door cannot be opened from outside the vehicle (6.2.3 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Bumper likely to become detached (6.1.4 (a) (ii)) DANGEROUS
Nearside Front brake is binding
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
sills are corroded
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Sill rusty.
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Outer Both sills rusty.
Exhaust has a major leak of exhaust gases Center. (6.1.2 (a))
Nearside Front Service brake excessively binding (1.2.1 (f))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Sill rusty.
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Outer Both sills rusty.
Central Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Both coil springs rusty.
Rear Both tyres worn on outer edges.
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded Jacking point. (2.4.A.3)
Rear fog lamp not working (1.3.2b)
Central Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Both coil springs rusty.
Rear Both tyres worn on outer edges.
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Condensation in n/s/f side/flasher lamp
Front Brake pad(s) wearing thin (3.5.1g)
N/s/r tyre worn on outer edges.
Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)
O/s/f a/roll bar link has slight play in upper ball joint.
Fuel system component leaking Pump area (7.2.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch / sill (2.4.A.3)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Condensation in n/s/f side/flasher lamp
Front Brake pad(s) wearing thin (3.5.1g)
N/s/r tyre worn on outer edges.
Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)
O/s/f a/roll bar link has slight play in upper ball joint.
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear bumper insecure
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Steering rack gaiter split (2.2.D.2d)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear bumper insecure
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Both rear coil springs rusty.
O/s inner sill rusty.
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Both rear coil springs rusty.
O/s inner sill rusty.
Both off side and near side inner sills corroded
Both rear brakes slightly binding
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Inner Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Inner Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Both off side and near side inner sills corroded
Both rear brakes slightly binding
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Centre Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Outer Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Outer Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H13 HJD is a 1996 Mazda Bongo in Green with a 2,490cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 1996 Mazda Bongo models, the average MOT pass rate is 65.9% with a typical mileage of 133,482 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying H13 HJD, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 30 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H13 HJD?
You can check the full history of H13 HJD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H13 HJD registered?
H13 HJD is a 1996 Mazda Bongo, first registered on 31 December 1996.
Is H13 HJD safe to buy?
The MOT history for H13 HJD shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H13 HJD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H13 HJD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.