2002 Jaguar X-type

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Shock absorbers has slight external damage to the casing all, slight corrosion to casings (5.3.2 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor at rear of OSF wheel arch, marked with chalk (6.2.2 (d) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Shock absorbers has slight external damage to the casing all, slight corrosion to casings (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

all shock absorbers have slight corrosion to casings

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear section of outer sill (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear section of outer sill (6.1.B.2)

Body has slight corrosion rear subframe (6.1.B.2)

Rear Suspension arm corroded but not seriously weakened all (2.4.G.1)

Shock absorber has slight corrosion to the casing front and rear, both sides (2.7.2a)

engine management light 'on'

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Front front brake binding (3.7.B.1)

Offside Rear rear brake binding (3.7.B.1)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Seat belt retracting mechanism defective (5.2.5b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate background overprinted or shadowed with text (6.3.1e)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

front brake juddering severely (3.7.A.2b)

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

o/s/r tyre chopping up on inner edge

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

o/s/r tyre chopping up on inner edge

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Inner Front brake disc slightly pitted (3.5.1h)

Offside Inner Front brake disc slightly pitted (3.5.1h)