MOT Status
ExpiredMileage
125,032 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe excessively corroded (3.6.B.2c)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear brake binding (3.7.B.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Rear reflector excessively damaged so that its function is impaired (1.5.1c)
Offside Stop lamp emits other than a steady red light (1.2.1e)
Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)
Offside rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
rear brakes release unevenly (3.7.B.4)
Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Inner Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside rear brake binding (3.7.B.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pipe excessively corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
How Reliable is the Mazda E Series?
Based on 81,836 MOT tests across 9,731 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H158 JWC is a 1990 Mazda E Series in Grey with a 1,998cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 63.6%.
Across all 1990 Mazda E Series models, the average MOT pass rate is 63.2% with a typical mileage of 114,758 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda E Series fails its MOT is brake pipe excessively corroded, accounting for 4,794 recorded failures. If you're considering buying H158 JWC, it's worth having these areas checked by a mechanic before committing.
The Mazda E Series typically stays on UK roads for around 36 years. At 36 years old, this Mazda E Series is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H158 JWC?
You can check the full history of H158 JWC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H158 JWC registered?
H158 JWC is a 1990 Mazda E Series, first registered on 21 September 1990.
Is H158 JWC safe to buy?
The MOT history for H158 JWC shows 11 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H158 JWC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H158 JWC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.