1991 Honda CG125

Front Wheel corroded but not to excess wheel rim corroded (5.2.2 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

All direction indicators adversely affected by the operation of another lamp effects rear brake light (4.4.3 (b))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Wheel corroded but not to excess wheel rim corroded (5.2.2 (c) (i))

Horn not working properly (7.7 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Brake pedal pivots slightly worn (3.1.3a)

Drive chain worn but not considered excessive Has a slight tight spot (6.2.1e)

Front Tyre valve stem slightly misaligned (4.1.2c)

Offside Rear shock absorber has a light misting (2.4.A.1c)

Rear Brake lining(s) close to minimum limit According to brake arm angle and adjuster nut (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly 'notchy' (2.2.1b)

Direction indicator affected by the operation of another lamp Stop lamp and main lights (1.5.1c)

Horn is not continous or uniform Affected by stop lamp and indicators (1.7.3c)

Brake pedal pivots slightly worn (3.1.3a)

Drive chain worn but not considered excessive Has a slight tight spot (6.2.1e)

Front Tyre valve stem slightly misaligned (4.1.2c)

Offside Rear shock absorber has a light misting (2.4.A.1c)

Rear Brake lining(s) close to minimum limit According to brake arm angle and adjuster nut (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly 'notchy' (2.2.1b)

Brake pedal pivots slightly worn (3.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Brake lever has inadequate reserve travel (3.1.3b)

Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)

Headlamp aim too low and too far to the right. (1.6)

Rear Stop lamp does not emit a steady light (1.3.1b)

Brake pedal pivots slightly worn (3.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly 'notchy' (2.2.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Floor brake test indicates a binding brake (3.3.C2c)