1991 Mazda 626

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor-pan (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill(complete) (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill(complete) (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch/upper (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner lower arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill(complete) (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (complete) (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor-pan (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (front ) (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill(complete) (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill(complete) (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch/upper (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner lower arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill(complete) (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (complete) (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected Cross member /chassis (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected Cross member /chassis (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Upper Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected Top mount/inside engine bay (5.3.6 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake has no recorded effort at a wheel Rear brakes very poor and unsafe to drive (1.2.1 (a) (ii)) DANGEROUS

Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected Vehicle is in an unsafe position to be driven due to the corrosion on the vehicle (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

O/S/F Wing rusty

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear exhaust insecure

Suspension component mounting prescribed area is corroded but not considered excessive Front chassis very rusty and weak (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Rear sub-frame very rusty and weak (5.3.6 (a) (i))

Front registration plate damaged

Nearside Front Bumper insecure ()

Offside Front Bumper insecure ()

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

chassis corroded

corrosion to both rear inner wheel arches

corrosion to front and rear sub-frames

corrosion to offside front wing

corrosion to outer sills

corrosion to rear floors

front suspension arms corroded

front tyres worn on inner edge

heavy corrosion to boot floor

heavy corrosion to front floors

heavy corrosion to inner sills

heavy corrosion to offside front inner wheel arch

heavy corrosion to offside front wheel arch under bonnet

poor repair to offside rear outer sill

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate damaged

Nearside Front Bumper insecure ()

Offside Front Bumper insecure ()

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

chassis corroded

corrosion to both rear inner wheel arches

corrosion to front and rear sub-frames

corrosion to offside front wing

corrosion to outer sills

corrosion to rear floors

front suspension arms corroded

front tyres worn on inner edge

heavy corrosion to boot floor

heavy corrosion to front floors

heavy corrosion to inner sills

heavy corrosion to offside front inner wheel arch

heavy corrosion to offside front wheel arch under bonnet

poor repair to offside rear outer sill

Brake fluid warning lamp illuminated (3.6.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded chassis X2 (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded upper inner wheel arch (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part on inner wheel arch (3.6.B.4a)

Offside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Rear Braking system leaking caliper (3.6.A.1)

Offside Rear Macpherson strut corroded and seriously weakened spring cup (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases box (7.1.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Exhaust has a minor leak of exhaust gases flexy close to excessive (7.1.2)

Front Registration plate damaged

Nearside Front Bumper insecure ()

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Bumper insecure ()

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

chassis corroded

corrosion to both rear inner wheel arches

corrosion to front and rear sub frames

corrosion to offside front wing

corrosion to outer sills

front suspension arms corroded

front tyres worn on inner edges

heavy corrosion to boot floor

heavy corrosion to front floor

heavy corrosion to front inner wheel arches

heavy corrosion to inner sills

Exhaust has a minor leak of exhaust gases (7.1.2)

heavy corrosion to nearside front floor

parking brake brake efficiency requirements only just met (16%)

service brake efficiency requirements only just met (52%)

Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

heavy corrosion to nearside front floor

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Parking brake lever has no reserve travel (3.1.6b)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nail in offside rear tyre

Passenger seat(s) missing at time of test

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

n/s/r brake binding a little

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Front coil spring corroded (2.4.C.1b)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear coil spring corroded (2.4.C.1b)

all front suspension deteriated by corrosion

all rear suspention deteriorated by corrosion

Offside rear parking brake recording little or no effort (3.7.B.6a)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Parking brake lever has no reserve travel (3.1.6b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Front coil spring corroded (2.4.C.1b)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear coil spring corroded (2.4.C.1b)

all front suspension deteriated by corrosion

all rear suspention deteriorated by corrosion

Rear Vehicle structure has slight corrosion (6.1.A.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pipe excessively corroded (3.6.B.2c)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Body has slight corrosion (6.1.B.2)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Headlamp aim too high (1.8)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Parking brake lever has no reserve travel (3.1.6b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Body has slight corrosion (6.1.B.2)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Parking brake lever has no reserve travel (3.1.6b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear brake disc slightly pitted (3.5.1h)

Suspension joint nearside lower dust cover split/missing

front tyres worn on inner/outer edges

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Inner Front brake disc excessively pitted (3.5.1h)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Inner Front brake disc excessively pitted (3.5.1h)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)