1990 Fiat Ducato

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Windscreen wiper blade defective arm loose (3.4 (b) (i))

Offside Engine mounting damaged but not to excess (6.1.8 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced wing holed , arch corroded (6.1.1 (c) (i))

Offside Front Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive holed (5.3.6 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

battery tray corroded but wood fitted over the top

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch holed (6.1.1 (c) (i))

Nearside Front Upper Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill holed (6.1.1 (c) (i))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Windscreen wiper blade defective wiper arm worn/loose (3.4 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced near front crossmember mount (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside Front Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor holed (6.1.1 (c) (i))

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing near bumper mount (6.1.1 (c) (i))

Nearside Front Upper Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Side repeater insecure (4.4.1 (c) (i))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Inner Integral body structure is repaired but structural rigidity is not significantly reduced wing area (6.1.1 (d) (i))

Offside Front Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive arm mount area (5.3.6 (a) (i))

Offside Inner Integral body structure is repaired but structural rigidity is not significantly reduced sills (6.1.1 (d) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing near bumper mount (6.1.1 (c) (i))

Nearside Front Upper Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Side repeater insecure (4.4.1 (c) (i))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Inner Integral body structure is repaired but structural rigidity is not significantly reduced wing area (6.1.1 (d) (i))

Offside Front Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive arm mount area (5.3.6 (a) (i))

Offside Inner Integral body structure is repaired but structural rigidity is not significantly reduced sills (6.1.1 (d) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive near tie rod mounting (5.3.6 (a) (i))

Offside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner floor (6.1.1 (c) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive near tie rod mounting (5.3.6 (a) (i))

Offside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner floor (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp reflector seriously defective (4.1.1 (b) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wing (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wing (6.2.2 (d) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill to chassis / leaf spring mount area (6.2.2 (d) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wing (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wing (6.2.2 (d) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill to chassis / leaf spring mount area (6.2.2 (d) (i))

Brake disc worn, pitted or scored, but not seriously weakened front discs in poor condition (1.1.14 (a) (ii))

Nearside Rear steering rack gaitor starting to crack

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Outer Drive shaft joint worn, but not excessively needs securing (6.1.7 (c) (i))

Offside Front Outer Driver's door catch deteriorated but the door can still be readily opened and closed needs securing (6.2.3 (c) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front just showing a beam

Offside Rear corrision inner plate

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Headlamp has a product on the lens but not seriously reducing light output both front head light just showing a beam (1.7.5a)

Nearside Front Inner Body has slight corrosion under wheel arch to chassis (6.1.B.2)

Headlamp has a product on the lens but not seriously reducing light output both front head light just showing a beam (1.7.5a)

Nearside Front Inner Body has slight corrosion under wheel arch to chassis (6.1.B.2)

Nearside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

O/S Headlamp reflector corroded

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

advise under body starting to show slight signs of corrosion but not holed yet

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

advise under body starting to show slight signs of corrosion but not holed yet

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear panel rusty

Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Emissions not tested (7.0)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front brake disc slightly pitted (3.5.1h)

Front brake disc slightly scored (3.5.1h)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)