MOT Status
ValidMileage
142,327 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Engine mounting damaged but not to excess engine steady soaked in oil (6.1.8 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
centre exhaust rubber broken
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Parking brake lever has little reserve travel (3.1.6b)
all fuel lines corroded
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
rear discs rusty.
slight noise nsf wheel bearing.
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
rear discs rusty.
slight noise nsf wheel bearing.
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
boot floor rusty
front and rear brake discs rusty
off side front shock absorber damp
off side outer sill rusty
rear brake pads getting low
rear chassis rusty
rear tyres loosing shape
slight manifold area exhaust blow
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Mechanical brake component securing device missing (3.5.1i)
Offside Rear Tyre fouling a part of the vehicle (4.1.D.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
boot floor rusty
front and rear brake discs rusty
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
off side front shock absorber damp
off side outer sill rusty
rear brake pads getting low
rear chassis rusty
rear tyres loosing shape
slight manifold area exhaust blow
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Driver's seat insecure (6.2.A.1)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Front registration plate with character(s) which are not of equal width along their entire length (6.3.4a)
Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Peugeot 205?
Based on 591,894 MOT tests across 102,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H198 HPB is a 1990 Peugeot 205 in Red with a 1,905cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 1990 Peugeot 205 models, the average MOT pass rate is 64.6% with a typical mileage of 101,760 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 205 fails its MOT is brake pipe excessively corroded, accounting for 43,839 recorded failures. If you're considering buying H198 HPB, it's worth having these areas checked by a mechanic before committing.
The Peugeot 205 typically stays on UK roads for around 40 years. At 36 years old, this Peugeot 205 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H198 HPB?
You can check the full history of H198 HPB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H198 HPB registered?
H198 HPB is a 1990 Peugeot 205, first registered on 5 November 1990.
Is H198 HPB safe to buy?
The MOT history for H198 HPB shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H198 HPB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H198 HPB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.