1991 Rover 416

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Tyre worn close to the legal limit both bold (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Brake pipe slightly corroded to both wheels (3.6.B.2c)

exhaust corroded

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill and wheel arch (5.2.6)

Offside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill and wheel arch (5.2.6)

oil leaking onto the exhaust pipe

Battery insecure (1.9.1)

oil leaking onto the exhaust pipe

Nearside Front Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Body insecure and dangerous to other road users (6.1.B.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Centre Front registration plate incorrect (6.3.1a)

Centre Rear registration plate incorrect (6.3.1a)

Nearside Inner Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

nearside door mirror cracked