1998 BMW Z3

Brake pipe corroded, covered in grease or other material All Greased (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp missing (4.5.1 (a) (ii))

Brake pipe corroded, covered in grease or other material All Greased (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pipe corroded, covered in grease or other material All Greased (1.1.11 (c))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Position lamp not working (4.2.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Emissions not tested (8.2.1.2 (d))

Brake pipe corroded, covered in grease or other material all rear (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Front Suspension arm pin or bush excessively worn Both (5.3.4 (a) (i))

Front Tyre fouling a part of the vehicle Both (5.2.3 (f))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear fog lamp missing (4.5.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Brake hose slightly deteriorated both front (3.6.B.4d)

Brake hose slightly deteriorated both rear (3.6.B.4d)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Parking brake lever has little reserve travel (3.1.6b)

engine cover fitted

Tyre worn close to the legal limit both front worn on outter edges (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake pipes covered with grease

engine covers fitted

exhaust slightly corroded

under trays fitted

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front front brake binding (3.7.B.1)

Tyre worn close to the legal limit both front worn on outter edges (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake pipes covered with grease

engine covers fitted

exhaust slightly corroded

under trays fitted

Ball joint has slight play (2.2.B.1f)

Suspension arm has slight play in a ball joint (2.4.G.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

under side heavely waxoiled

Offside Front Shock absorber has a light misting of oil (2.7.3)

brake pad warning light on dash {all pads ok for linng thickness}

rear chassis n/s and o/s heavily undersealed

rear of exhaust system corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)