1991 BMW 3 Series

Brake pipe excessively corroded Both main metal pipes to flexible hoses. (1.1.11 (c))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Oil leak

under body corrosion

Battery insecure (1.9.1)

Driver's seat insecure (6.2.A.1)

Nearside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Coil spring not correctly located (2.4.C.2)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Nearside Headlamp aim too low (1.8)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Coil spring not correctly located (2.4.C.2)

Offside Headlamp aim beam image kick up to the offside (1.8)

Offside Headlamp aim too high (1.8)

Offside Steering rack gaiter split (2.2.D.2d)

Oil leak

under body corrosion

drivers seat back is loose

Battery insecure (1.9.1)

Nearside Front Headlamp aim beam image kick up to the offside (1.8)

Offside Front Headlamp aim beam image kick up to the offside (1.8)

Offside Front Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Power steering malfunctioning (2.3.3a)

drivers seat back is loose

offside rear tyre has uneven wear on its inner tread area

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front registration plate insecure (6.3.1b)

Nearside Front Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Headlamp insecure (1.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Vehicle structure has slight damage (6.1.A.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

offside front steering rack arm slight movement

Rear Brake pad(s) wearing thin (3.5.1g)

o/s wiper blade slightly split

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

o/s wiper blade slightly split

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear fog lamp not working (1.3.2b)

Front registration plate missing (6.3.1a)

Nearside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear fog lamp not working (1.3.2b)

Stop lamp remains on when the brakes are released (1.2.1e)

centre mirror missing

exhaust manifold stud missing

fuel tank damaged

side skirts fitted

Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate incorrect (6.3.1a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Direction indicator not working (1.4.A.2c)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Rear fog lamp tell tale not working (1.3.1b)

Rear registration plate incorrect (6.3.1a)